Drinking Bowls made from Cast Iron Or Plastic Are A Durable Long Lasting Bowl. Available for cattle and calves.

• Cast Iron or Plastic.
• Singles and doubles.
• Optional galvanised steel protections.

LAC 5

• POLYCOAT cast iron.
• Designation : Bowl with constant water level
• Connection without threading on horizontal tube 3/4″ (20×27) or from the bottom with threading 1/2″ (15×21) with extension A-821.
• Cast-iron bowl with constant water level
• Draining plug
• Valve out of reach of animals.
• Possible locking in case of colic.

LAC 55

• POLYCOAT cast iron.
• Double bowl with constant water level
• Connection without threading on horizontal tube 3/4″ (20×27) or from the bottom with threading 1/2″ (15×21) with extension A-821
• Valve out of reach of animals.
• Draining plug.
• For up to 25 animals

AQUAMAT

• The smoothest diaphragm pasture pump available in the market
• Pumps water up to a depth of 7 metres (23′).
• 26 x 34 (1″) connection
• The new generation of pasture pumps.
• Very sturdy and rust-resistant polyethylene-bowl.
• Very smooth to operate.

F60 non-spill bowl

• Can be fixed between 2 pens
• Multidirectional connection 1/2″ (15×21) – Brass valve with tube
• Flow rate adjustable from the outside
• Removable non-spill edge
• Drain plug.
• Non-spill double drinking bowl
• Large and deep bowl with non-spill edge.
• Lower need of loose straw (no wet litter)
• Easy access from 2 boxes due to its large size.
• Easily adjustable flow rate from the outside, from 0 to 17 L (4.5USG)/Min.
• Valve with built-in filter
• Removable metallic non -spill edge.
• 9 fitting possibilities.

Forstal

• Synthetic bowl – 4 fixing points
• 1/2″ (15×21) connection from the top or from the bottom.
• Large capacity
• Avoid wet bedding
• Unbreakable water which can not injure your horse.
• Paddle valve, can be locked shut in case of colic.

Stainless steel waterers – F130

• AISI 304 stainless steel bowl, deep drawn and polished.Non-spill design.
• AISI 304 stainless steel valve.
• 9 possibilities for water connection.
• Very sturdy plastic mounting plate.
• More shock resistant than cast iron.
• Adjustable flow rate from 0 to 18 litres (4,76 USG)/min at 3 bar (=42 psi).
• Drain plug.

Stainless Steel Water Tanks

Stainless Steel is used for our water tanks, as it is a long lasting rust proof metal, which can be easily cleaned. Thus keeping your drinking tanks more hygienic. Available in various sizes. and with optional protection.

• 1.25m, or .625m long.
• Drain off bung.
• Wall mounting.
• Optional protection in areas of walk through in cattle sheds.
• Water level is maintained with covered ball-cock system.

For other drinkers see Flipping Drinker Tank, Drinking Bowls

Stainless Steel Flipping Drinker
A common problem with drinking tanks in houses is water being fouled. Cleaning out tanks can often be an arduous task but with the flipping drinker, contents can be simply dumped by a quick flick over of the tank, which is on a pivot.

• Made with Stainless Steel.
• Easily cleaned with one quick action.
• Wall mounting.
• Available in various sizes.